BSD小僧の日記

あとから何かと役に立つ、初期状態のfdiskとdisklabelも残しておこう。

fdiskの結果。

Disk: /dev/rwd0d
NetBSD disklabel disk geometry:
cylinders: 310101, heads: 16, sectors/track: 63 (1008 sectors/cylinder)
total sectors: 312581808

BIOS disk geometry:
cylinders: 1023, heads: 255, sectors/track: 63 (16065 sectors/cylinder)
total sectors: 312581808

Partitions aligned to 2048 sector boundaries, offset 2048

Partition table:
0: NTFS, OS/2 HPFS, QNX2 or Advanced UNIX (sysid 7)
    start 2048, size 409600 (200 MB, Cyls 0-25/159/6), Active
1: NTFS, OS/2 HPFS, QNX2 or Advanced UNIX (sysid 7)
    start 411648, size 217907200 (106400 MB, Cyls 25/159/7-13589/183/34)
2: Ext. partition - LBA (sysid 15)
    start 218318848, size 63320064 (30918 MB, Cyls 13589/183/35-17531/53/58)
3: Compaq diagnostics (sysid 18)
    start 281638912, size 30942896 (15109 MB, Cyls 17531/53/59-19457/80/63)
Extended partition table:
E0: NTFS, OS/2 HPFS, QNX2 or Advanced UNIX (sysid 7)
    start 218320896, size 63318016 (30917 MB, Cyls 13589/183/35-17531/53/58)
First active partition: 0
Drive serial number: 2433438252 (0x910b522c)

disklabelはこんなの。

# /dev/rwd0d:
type: ESDI
disk: WDC WD1600BEVT-2
label: fictitious
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 310101
total sectors: 312581808
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0		# microseconds
track-to-track seek: 0	# microseconds
drivedata: 0 

9 partitions:
#        size    offset     fstype [fsize bsize cpg/sgs]
 d: 312581808         0     unused      0     0        # (Cyl.      0 - 310100)
 e:    409600      2048       NTFS                     # (Cyl.      2*-    408*)
 f: 217907200    411648       NTFS                     # (Cyl.    408*- 216586*)
 g:  30942896 281638912    unknown                     # (Cyl. 279403*- 310100)
 i:  63318016 218320896       NTFS                     # (Cyl. 216588*- 279403*)

はい。恒例のdmesgいっときます。NetBSD 5.99.51のインストールCDでブートして、インストーラから/bin/sh起動してdmesgとった結果です。

CPUが2個見えてるねー。有線LANはちゃんと使えている。無線はさすがにダメですね。内蔵HDDも見えて、内蔵カードリーダも使えそうな感じかな。おっ、音も鳴りそうですね。

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.51 (GENERIC) #0: Sun May  1 00:13:02 UTC 2011
	builds@b8.netbsd.org:/home/builds/ab/HEAD/i386/201104301800Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
total memory = 1013 MB
avail memory = 984 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO                           S10-3            (Lenovo                  )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Atom(TM) CPU N455   @ 1.66GHz, id 0x106ca
cpu1 at mainbus0 apid 1: Intel(R) Atom(TM) CPU N455   @ 1.66GHz, id 0x106ca
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110211
acpi0: X/RSDT: OemId <LENOVO,CB-01   ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
acpivga0 at acpi0 (IGD0): ACPI Display Adapter
acpiout0 at acpivga0 (DD02, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD01, 0x0410): ACPI Display Output Device
acpiout1: brightness levels: 5 15 25 35 45 55 65 75 85 95 100
acpivga0: connected output devices:
acpivga0:   0x0410 (acpiout1): Int. Digital Flat Panel, index 0, port 1, head 0
acpivga0:   0x0100 (acpiout0): VGA Analog Monitor, index 0, port 0, head 0
MBRD (PNP0C02) at acpi0 not configured
npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN103A) (aux port): irq 12
FWH (INT0800) at acpi0 not configured
VPC0 (VPC2004) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpibat0: WM-MP LION rechargeable battery
acpibat0: model number MM-y9M3Z14, serial number  
acpibat0: granularity: low->warn 0.010 Ah, warn->full 0.025 Ah
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiwmi0 at acpi0 (WMI2, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpitz0 at acpi0 (TZ00): cpu0 cpu1
acpitz0: levels: critical 100.0 C, passive 95.0 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.4
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0xa010 (rev. 0x00)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0xa011 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0xa012 (miscellaneous display) at pci0 dev 2 function 1 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: couldn't map mmio space
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 5
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci1 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x02)
re0: interrupting at ioapic0 pin 16
re0: Ethernet address 60:eb:69:9a:af:3d
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 9
pci2: no spaces enabled!
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci3 at ppb2 bus 17
pci3: i/o space enabled
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27bc (rev. 0x02)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x27c1
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: AHCI revision 1.1, 4 ports, 32 command slots, features 0xcf20e000
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat  20 us, pow   500 mW
acpicpu0: C3: FFH, lat 100 us, pow   100 mW, bus master check
acpicpu0: P0: FFH, lat  10 us, pow  2000 mW, 1667 MHz
acpicpu0: P1: FFH, lat  10 us, pow  1300 mW, 1333 MHz
acpicpu0: P2: FFH, lat  10 us, pow   600 mW, 1000 MHz
acpicpu0: T0: FFH, lat   1 us, pow   600 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow   525 mW,  88 %
acpicpu0: T2: FFH, lat   1 us, pow   450 mW,  75 %
acpicpu0: T3: FFH, lat   1 us, pow   375 mW,  63 %
acpicpu0: T4: FFH, lat   1 us, pow   300 mW,  50 %
acpicpu0: T5: FFH, lat   1 us, pow   225 mW,  38 %
acpicpu0: T6: FFH, lat   1 us, pow   150 mW,  25 %
acpicpu0: T7: FFH, lat   1 us, pow    75 mW,  13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 0: PHY offline
wd0 at atabus1 drive 0
wd0: <WDC WD1600BEVT-24A23T0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
umass0 at uhub4 port 2 configuration 1 interface 0
umass0: BUFFALO INC. BUFFALO INC. USB2.0-IDE Bridge, rev 2.00/1.00, addr 2
umass0: using ATAPI over Bulk-Only
atapibus0 at umass0: 2 targets
cd0 at atapibus0 drive 0: <PLDS, DVD A  DH20A4P, NB21> cdrom removable
umass1 at uhub4 port 7 configuration 1 interface 0
umass1: Generic USB2.0-CRW, rev 2.00/58.88, addr 3
umass1: using SCSI over Bulk-Only
scsibus0 at umass1: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
sd0: drive offline
sd0(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0: unable to open device, error = 19
uvideo0 at uhub4 port 8 configuration 1 interface 0: Image Processor Lenovo EasyCamera, rev 2.00/7.17, addr 4
video0 at uvideo0: Image Processor Lenovo EasyCamera, rev 2.00/7.17, addr 4
Kernelized RAIDframe activated
sd0(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

boot device: cd0
root on cd0a dumps on cd0b
root file system type: cd9660
warning: no /dev/console

Lenovo IdeaPad S10-3 ( 0647AQJ ) を26,800円で購入。

Atom N455 1.66GHz, 1GB, 160GB, 1024x600 LCD, 100/10 LAN, b/g/n Wifi, camera, 5 in 1 card reader, Win7 starter って感じのスペック。

Lenovoのキャッシュバックプログラムに申し込んだので2,000円もどってきて、実質24,800円ならいい感じ。

EeePC(初代)以来のNetbookなのでいろいろ遊びたいところ。